RamRods Vektor 2S Stabiliser - Long

The Vektor 2 S is a stiffer variant of the Vektor 2, designed for archers who want increased rigidity while maintaining the same wind efficient profile.

The Vektor 2 and Vektor 2 S share the same geometry, dimensions, and overall design.

The difference is in the carbon layup.

The S version uses a higher modulus carbon construction that increases stiffness by approximately 13 percent, giving archers a more rigid and responsive feel.

The result is a stabilizer that holds steadier, reacts cleaner after the shot, and performs reliably in real outdoor conditions.

If you like the feel and wind performance of the Vektor 2 but want additional stiffness and weight carrying capability, the Vektor 2 S delivers that performance without changing the overall system feel.

SPECIFICATIONS:

• Carbon Construction
  • Ultra high modulus carbon fiber layup
• Diameter
  • Front stabilizers
    • 0.60” base tapering to 0.53” tip
  • Side stabilizers
    
    • 0.57” base tapering to 0.53” tip
  • The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest.
  • This geometry also improves vibration reduction compared to a parallel carbon tube.
• Stiffness
  • C-Spine: 380
  • Recommended weight range
    
    • Front stabilizer: 6-25 oz
  • The Vektor 2 S uses a higher modulus carbon layup than the Vektor 2, increasing stiffness by approximately 13 percent.
  • This places it closer to the Beast in overall rigidity while maintaining a more wind efficient diameter.
  • Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost.
• End Caps
  • EDGE aerospace grade aluminum
  • The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness.
  • A deeper overlap between carbon and aluminum also increases durability.
• Threads
  • 5/16-24 threaded ends
  • Compatible with standard stabilizer weights, dampers, and conversion screws.
• Stabilizer Mass (without weights)
  • Long
    • 26” – 4.4 oz
    • 27” – 4.5 oz
    • 28” – 4.7 oz
    • 29” – 4.8 oz
    • 30” – 4.9 oz
    • 32” – 5.2 oz
  • Tungsten VIBRO-Core option adds 2 oz
  • Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers.