RamRods Vektor 2 Stabiliser - Short

Elite hybrid performance. Balanced stiffness and wind efficiency for both compound and recurve competition.

The Vektor 2 is the evolution of one of the most versatile stabilizers ever built.

The profile has been updated with a refined Wind Taper geometry, increasing the base diameter while maintaining a narrow tip.

This keeps the excellent wind efficiency of the original Vektor while improving stiffness, vibration reduction, and overall shot reaction.

The result is a stabilizer that reduces tip flutter and creates a more confident aiming picture.

SPECIFICATIONS:

• Carbon Construction
  • Ultra high modulus carbon fiber layup
• Diameter
  • Front stabilizers
    • 0.60” base tapering to 0.53” tip
  • Side stabilizers
    
    • 0.57” base tapering to 0.53” tip
  • The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest.
  • This geometry also improves vibration reduction compared to a parallel carbon tube.
• Stiffness
  • C-Spine: 440
  • Recommended weight range
    
    • Front stabilizer: 3–20 oz
    • Side stabilizer: 3–30 oz
  • The Vektor 2 sits between the Ultra and Beast in overall stiffness, making it one of the most versatile stabilizers in the RamRods lineup.
  • An optional Vektor 2 S version measures 380 C-Spine, providing over 13% additional stiffness for compound athletes who run heavier weight systems.
  • Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost.
• End Caps
  • EDGE aerospace grade aluminum
  • The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness.
  • A deeper overlap between carbon and aluminum also increases durability.
• Threads
  • 5/16-24 threaded ends
  • Compatible with standard stabilizer weights, dampers, and conversion screws.
• Stabilizer Mass (without weights)
  • Short
    • 10” – 2.2 oz
    • 11” – 2.4 oz
    • 12” – 2.5 oz
    • 13” – 2.6 oz
    • 14” – 2.7 oz
    • 15” – 2.9 oz
  • Long
    • 26” – 4.4 oz
    • 27” – 4.5 oz
    • 28” – 4.7 oz
    • 29” – 4.8 oz
    • 30” – 4.9 oz
    • 32” – 5.2 oz
  • Tungsten VIBRO-Core option adds 2 oz
  • Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers.