Easton X7 Eclipse - Shaft Only

Product Code:

EAS131

X7 Eclipse is the number one choices of target and 3D pros.

Full Description

Starting at £7.18

Add to Wish List

Target Tech Layered Foam Target

PayPal Credit

0% Finance available through PayPal Credit More info here

Easton X7 Eclipse - Shaft Only
Easton X7 Eclipse - Shaft Only
Product
Product Info

Product Code: 700843

Easton X7 Eclipse - Shaft Only - 1514
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700843

Easton X7 Eclipse - Shaft Only - 1514
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

21 In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700844

Easton X7 Eclipse - Shaft Only - 1614
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700844

Easton X7 Eclipse - Shaft Only - 1614
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

12 In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700846

Easton X7 Eclipse - Shaft Only - 1714
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700846

Easton X7 Eclipse - Shaft Only - 1714
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

1 In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700847

Easton X7 Eclipse - Shaft Only - 1814
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700847

Easton X7 Eclipse - Shaft Only - 1814
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

11 In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700848

Easton X7 Eclipse - Shaft Only - 1914
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700848

Easton X7 Eclipse - Shaft Only - 1914
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

24+In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700849

Easton X7 Eclipse - Shaft Only - 2014
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700849

Easton X7 Eclipse - Shaft Only - 2014
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

24+In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700850

Easton X7 Eclipse - Shaft Only - 2114
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700850

Easton X7 Eclipse - Shaft Only - 2114
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

10 In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700852

Easton X7 Eclipse - Shaft Only - 2213
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700852

Easton X7 Eclipse - Shaft Only - 2213
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

24+In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700851

Easton X7 Eclipse - Shaft Only - 2214
£7.18
  • Buy 12 for £6.46 each and save 10%

Product Code: 700851

Easton X7 Eclipse - Shaft Only - 2214
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

?

Nocks vary in length.

This length is taken into consideration when we cut the shafts.

Please specify the make and model of nock you will be using. e.g. "Easton Super Nock"

If you do not have a preference, then enter "Standard" and we will use a standard nock.

Maximum number of characters: 30

24+In Stock

£7.18
  • Buy 12 for £6.46 each and save 10%

X7 Eclipse is the number one choices of target and 3D pros.

The Super Swage and UNI nock systems align the Super Nock directly with the arrow shaft. Stringent manufacturing tolerances combine for the most accurate arrows ever made.

Additional notes regarding nock fitting:

  • Shaft sizes up 1514 through 1914 use 'G nock' fitting.
  • Sizes 2014 and above use 'Super nock' fitting.

Maximum stock lengths:

  • 1514 = 27"
  • 1614 = 28.5"
  • 1714 = 29.5"
  • 1814 = 30"
  • 1914 = 29.5"
  • 2014 = 32"
  • 2114 = 33"
  • 2213 = 34"
  • 2214 = 33"

 Please Note Maximum stock lengths (These are given to us as a guide by Easton. If you are ordering uncut lengths and plan on keeping them full length, or close to, we advise contacting us beforehand to verify the stock length in stock.):

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account