Easton RX-7 - Shaft Only

Product Code:

EAS212

New for the 2020 indoor season, Easton announces the most accurate, technically advanced indoor arrow shaft ever devised for recurve finger shooters- the all-new RX-7 series.

Full Description

Starting at £106.94

Add to Wish List

Stark Ligero Recurve Riser - 40% Off

BOOK NOW

Product
Product Info

Product Code: 835158

Easton RX-7 - Shaft Only - 420 - 12pk
£106.94

Product Code: 835158

Easton RX-7 - Shaft Only - 420 - 12pk
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

Maximum number of characters: 30

2 In Stock

£106.94

Product Code: 835159

Easton RX-7 Shaft Only - 475 - 12pk
£106.94

Product Code: 835159

Easton RX-7 Shaft Only - 475 - 12pk
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

Maximum number of characters: 30

2 In Stock

£106.94

Product Code: 835160

Easton RX-7 Shaft Only - 525 - 12pk
£106.94

Product Code: 835160

Easton RX-7 Shaft Only - 525 - 12pk
Select Options
?

If you would like us to cut your shafts, enter your AMO arrow length in INCHES here.  e.g. 29.5"

If you do not want the shafts cutting, enter "Do not cut"

The term ‘AMO’ stands for Archery Manufacturers Organisation.  They produce a set of standards the archery industry can work to. 

AMO Arrow Length is the measurement of an arrow taken from the bottom of the groove of the nock, to the end of the shaft.  (Not including the points or point inserts).

These are the standards we work to.

amo

Our cutting tolerances are + - 1/16”

 

(Please check the maximum stock length of the shaft as specified in the description.  We can't cut the shafts longer than the stock length!)

Maximum number of characters: 10

Maximum number of characters: 30

2 In Stock

£106.94

New for the 2020 indoor season, Easton announces the most accurate, technically advanced indoor arrow shaft ever devised for recurve finger shooters- the all-new RX-7 series.

Available in three spine values- 525, 475, and 420- in a 21, 22, and World Archery Maximum 23 diameter.

Easton’s new RX-7 series 7178 aluminium arrow shafts incorporate a precision rear taper – effectively letting recurve shooters shoot a bigger arrow at a lower bow weight, and also with less point weight while maintaining maximum shaft diameter for higher scoring potential.

Proven in the 2018-19 competition season by some of the top archers in the world, including Team USA’s Brady Ellison and Jack Williams, the RX-7 is based on the same proven design principle as Easton’s X10 and A/C/E shafts, with the precision flexible, forgiving rear taper.

This design element drops the dynamic spine of the arrow shaft by up to one full size, which allows the use of a larger diameter and lighter point.

Until now, many shooters seeking maximum diameter arrow shafts often needed to compromise the bow tune, and potentially compromise shooting technique forgiveness, by using super-heavy points, leading to greater error potential with slight natural release inconsistencies.

By using a normal weight point, and a precision-engineered, more flexible rear taper with a weight-forward design, RX-7 series shafts provide the ultimate in finger release forgiveness. RX-7 uses a full-strength 7178-T9 alloy that easily copes with tough European target materials.

RX-7 shafts are supplied with Easton Super-UNI bushings, which accept available Easton Super Nocks, 3D-Super Nocks, and the popular size 19 Beiter nock.

SPECIFICATIONS:

MODEL

SPINE

DIAMETER

STOCK LENGTH

GPI

2315 – 420

0.420"

.365"

33.75"

10.4

2214 – 475

.475"

.348"

33.5"

9.7

2114 – 525

0.525"

.328"

32.5"

9.3

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account