Mybo Offside Stabiliser Mount
A versatile mount, available in two sizes. ‘Standard’ (pictured above) and ‘XL’. The only difference being the length - The XL version will give greater clearance if your preference is to swing the side rod tight in against the bow.
Both versions use the same powerful taper fit joint as the 3SIXTY fully adjustable v-bar, and an oversized locking bolt to make sure that once adjusted, it stays put!
Mount conventionally, as you would mount a typical v-bar. Or if your bow allows, a common location for these is under the grip, on the inside of the riser.
- Anodised aluminium body
- All metal construction
- Powerful, taper fit joint
- Allen key included
For additional specifications please visit www.ilovemybo.com
Really happy with the product. Very solid bit of kit. The only problem is that the clearance is tight on Fuse Carbon Blade
Outstanding, compact, and secure
Nice little offset mount. Taper joint is rock solid when fully tightened, and despite not being the XL, still has a good bit of clearance past the riser on my Ignite, so can be parallel with the longrod, and still have a couple of mm clearance.
Only "complaints I've got really are a lack of colour choices (would have been nice to have something in the Hoyt pearl white), and some excess paint in the offset UNC mount (which was fixed by gently chasing the thread out), but they're only little things.
Very good so far
Used this for a few months. Stays put, no fuss, no constant retightening.