Easton X7 Eclipse - Ready to Use
X7 Eclipse is the number one choice of target and 3D pros. The Super Swage and UNI nock systems aligns the Super Nock directly with the arrow shaft. Stringent manufacturing tolerances combine for the most accurate arrow ever made.
7178-T9 aerospace alloy Strength (psi): 105,000
Straightness: ± .001
Weight tolerance: ± 3/4
Hard anodized Alloy
Additional notes regarding nock fitting.
Shaft sizes up 1514 through 1914 use 'G nock' fitting.
Sizes 2014 and above use 'Super nock' fitting.
Note on Nock Selection:
• 1514 - 1914 spine shafts take a G Nock.
• 2014 + Takes a Super Nock
Please Note Maximum stock lengths :-
1514 = 27"
1614 = 28.5"
1714 = 29.5"
1814 = 30"
1914 = 29.5"
2014 = 32"
2114 = 33"
2213 = 34"
2214 = 33"
We will gladly cut your arrows/shafts to size, but please note the following.
1) The industry standard (AMO) method of measurement is from the bottom of the nock groove to the end of the shaft.
2) Our cutting tolerances are +- 1/16” with appropriate nock combination.
If you require anything different from the above, we will be pleased to accommodate you. But you must email us for instructions before ordering.
We can do most things, but we can’t put the end back on an arrow!
Shoot well, quality is good, what more could you want. Made to measure whilst we were in store. Great Merlin service as is the norm.
Well made arrows from Merlin
These were my first arrows.
The quality of these arrow spines is superb with very low tolerances. Merlin did a great job making the arrows to my specification, and the price was the best I could find online.
The guys at Merlin were very helpful with advice on the correct spine for my limb weight.
A really high quality product delivered quickly to your requirements/ taste. shoots well and looks great too